The PROFINET certified Industrial Ethernet switches enable real-time communication for automation control. PROFINET bypasses the network layer for some specific application to provide real-time communication. Volktek comes up with the openstandard PROFINET certified industrial switches for real-time motion control of industrial instruments and factory automation. In a high precision control environment, the data exchange rate must be faster to meet the speed requirements. Therefore, the PROFINET certified switches can transmit the real-time and Non-real-time data in 10 and 100ms, respectively.

Accident Proof

Engineered to withstand electromagnetic interference, electrostatic discharge, power surge, over-voltage, over-current, and reverse polarity in the event of an accident.

SFP Digital Diagnostic Monitoring

The DDM feature monitors SFP real-time parameters to diagnose faults efficiently. Users receive automatic warning messages through e-mail and relay output with real-time alarm messages.

Network Segmentation and Improved Traffic

VLANs to segment the network into smaller parts and organize them into separate broadcast domains to control traffic, limit broadcast traffic and reduce broadcast storms. At the same time, the switch offers GVRP protocol to eliminate unnecessary network traffic.

Network Redundancy

Volktek's industrial switches redundant ring architecture enhances network reliability and make them ideal for deploying secure automation network systems in tough outdoor industrial environments, such as ITS, maritime, mining, and manufacturing systems. With Volktek Xpress Ring there are various choices of ring topologies, including Xpress Ring, Dual Xpress Ring, Dual Homing, in rapid recovery time (<20ms @ 250 switches). G.8032v2, Ethernet Ring Protection Switching (ERPS) protocol,provides protection for Ethernet traffic in a multiple ring topology with fast recovery time (less than 50ms).VLANs to segment the network into smaller parts and organize them into separate broadcast domains to control traffic, limit broadcast traffic and reduce broadcast storms. At the same time, the switch offers GVRP protocol to eliminate unnecessary network traffic.

Redundant Power System 
To guarantee power runs continuously the switch is designed to be simultaneously connected to two power supplies and an alarm through a standard industrial terminal block. If one power supply stops working the switch will start feeding its power on the alternative power supply and the alarm will go off to notify technicians about the event.

Standards
IEEE 802.3	10BASE-T
IEEE 802.3u	100BASE-TX
IEEE 802.3ab	1000BASE-T
IEEE 802.3x	Flow Control
IEEE 802.3ad	Link Aggregation
IEEE 802.1ab	LLDP
IEEE 802.1D	STP
IEEE 802.1w	RSTP
IEEE 802.1s	MSTP
IEEE 802.1p	Class of Service
IEEE 802.1Q	VLAN Tagging
IEEE 802.1X	Port Authentication
Interface
Ports	8 x 10/100/1000BASE-T RJ45 Port 4 x Gigabit SFP Slots 1 x RJ45 Console Port
DIP Switch	Primary/Redundant (PWR/RPS) power voltage drop alarm setting Per Port connectivity status alarm setting
LED Panel	PWR, RPS, ALM, POST, 1000, 10/100, SFP
Power
Input Voltage	Primary inputs：12V~60VDC Redundant inputs：12V~60VDC
Power Consumption	System：18W
Alarm Relay	One relay output, 1 A @ 24V DC
Mechanical and Environment
Housing	Aluminum (IP30 Protection)
Mounting	DIN-Rail
Operating Temperature	-40°C~75°C
Storage Temperature	-40°C~85°C
Operating Humidity	10 to 95% RH (non-condensing)
Storage Humidity	5 to 95% RH (non-condensing)
Dimension (WxHxD)	50x161.5x120mm (1.97x6.4x4.72inch)
Weight	860g

Volktek continues to develop client-valued functions. Please call us for more details.