- About the power alarm on INS-8648, the power input range is 12 to 60 VDC. Is there any reason to set > 57V DC to trigger an alarm?
The power circuit for this model ranges from 12 to 57 VDC. The switch can accept an input voltage up to 60V, though it will generate an alarm when power is over 57V.
- Can Dual Homing work with link aggregation?
Yes. Dual Homing can work with LACP. Under the Dual Homing setting, you can configure active/backup link by port or trunk.
- Is there a log when the port is disabled by the loop detection algorithm?
Yes, the switch will generate a log.
- SFP details do not reflect in port 9.
This is a firmware related issue. Please contact our Technical Support at support@volktek.com for the latest firmware.
- Switch restarts when the "reset" button is used
The reset button on the switch is designed to restart the switch. When it is pressed for over 5 seconds, the switch will load to factory default settings.
- Email alarm features do not work with other email domains (Gmail server)
Security settings of public domain mail servers such as gmail or yahoo may cause this issue. You need to enable those mail servers to allow less secured apps to work. Email alarm features work best with private domains.
- How to configure port isolation on MEN-3410?
● Commands to configure port isolation:
- MEN-3410(config)#interface fa1/0/1
- MEN-3410(config-if)#port-isolation ports 1,9-10,0
- 1 → Interface Id
- 9-10 → Uplink ports
- 0 → CPU
● Through Web GUI:
Under VLAN menu, select port isolation. Downlink ports should be isolated.
Select port ID & Egress Port (uplink ports) and click on 'Apply' to configure port isolation.
Port status ‘V’ indicates that port packet can be sent to that port.
Port status ‘-’ indicates that port packet cannot be sent to that port. - How to configure management VLAN on MEN-3410/MEN-4210?
Commands to configure management VLAN
- MEN-3410(config)#interface eth0
- MEN-3410(config-if)#management vlan
Configure management VLAN through Web GUI
Under "General setting", you can change hostname, DHCP client enable/disable, configure static IP address, subnet mask, default gateway, and management VLAN. - What are the commands to change management IP on MEN-3410/MEN-4210?
Commands to change management IP:
- MEN-3410(config)#interface eth0
- MEN-3410(config-if)#ip address ABCD/M
- MEN-3410(config-if)#ip address default-gateway ABCD
To enable DHCP client:
- MEN-3410(config)#interface eth0
- MEN-3410(config-if)#ip dhcp client enable
Change management IP through GUI:
Under "General Setting", you can change hostname, DHCP client enable/disable, configure static IP address, subnet mask, default gateway, and management VLAN. - What is the charging current for MEN-4210?
Model Charging Current
MEN-4210 0.8Amps
| Organization Name | Volktek |
| Qualification | Education: UG: B.Tech/B.E. Electronics/Electrical/Communication/Computer Science/Instrumentation
PG: MBA/PGDM (Preferred, but not mandatory) |
| Functional Area | Sales, Business Development |
| Role | Sales Manager |
| Relevant Industry | Networking, Automation |
| Job Description |
1. Responsible for distribution development, follow up contacts and
accounts maintenance. 2. New business & accounts development. 3. Coordinate with other departments for customer needs. 4. Collect market trend & analysis. 5. Meet monthly sales target & make reports. |
| Personality |
1. Responsible and detailed person with strong ability of execution.
2. Open minded, high EQ, aggressive, able to work under pressure. |
| Exp. Required in Years | Min. : 5; Max. : 10 |
